Curse

wutdafeezi · Aug 22, 2005, 05:19 AM // 05:19

I think I found the source of the problem.

I had updated the Marvell Yukon integrated ethernet controller on Windows Update on 7/20/2005 to version 8.35.

By rolling it back to 8.32 (6/27/2005) or any previous driver before 8.35, the crashing and freezing stopped. Ok ok so I tried everything I can do to make Guild Wars not lockup on me. I went through great lengths with no good results. Until I came across this info and I have been playing lockup free ever since. So if you ever updated the 8.35 on windows update try rolling back to your previous driver and see if that helps. I am even online still as I type this post! woot!

*EDIT*
If you can't rollback drivers try downloading from their website found here:
http://www.marvell.com/drivers/search.do

If you don't know how to check the version of your driver post can be found here:
http://www.guildwarsguru.com/forum/s...27&postcount=5

Elvarg · Aug 22, 2005, 05:45 AM // 05:45

What do you know, I completely forgot about actually installing that update around that time to fix an unrelated problem (which it didn't, and hence was useless anyways). I rolled it back to my last one now (.25) and will post how it worked.

wutdafeezi · Aug 23, 2005, 01:56 AM // 01:56

*bump*

I'm going on my 2nd day of not having any problems since I rolled back to the previous driver.

grasso_mike · Aug 23, 2005, 03:12 PM // 15:12

i need to get this! wheres the site? i have windows xp, and i play from a college dorm, and it locksup every 2 secs. the exact address where i can get that 8.32 version.

wutdafeezi · Aug 24, 2005, 04:09 AM // 04:09

Right click "My Computer", choose "Properties".
Now click on the "Hardware" tab. Once there click on "Device Manager"
Under the Network adapters; you should see a Marvell Yukon Gigabit Ethernet Controller.
Right click and choose "properties", under that window go to "drivers"
Make certain that you have the 8.35.2.3 driver installed. If you do just go ahead and roll back to previous driver. It will go back to the previous driver installed. Make sure to reboot after to see if it fixed the problem with your lockups.

Omiko1 · Aug 24, 2005, 03:55 PM // 15:55

This worked for me! I rolled my drivers back... they went back to 7.1... something, but I played for hours with no lockup!

EF2NYD · Aug 24, 2005, 07:00 PM // 19:00

What video card and drivers are you using? I have a Yukon chip as well, but I'm thinking the drivers for my Geforce 6600gt are to blame for the lockups (anything in the 7x.xx series). Also, I wouldn't trust ANY drivers on the Windows Update site.

wutdafeezi · Aug 25, 2005, 08:51 AM // 08:51

Quote:

Originally Posted by EF2NYD

What video card and drivers are you using? I have a Yukon chip as well, but I'm thinking the drivers for my Geforce 6600gt are to blame for the lockups (anything in the 7x.xx series). Also, I wouldn't trust ANY drivers on the Windows Update site.

X800 pro with cat5.8 drivers, as of yet i had no lockups since i rolled back this driver!

zixaq · Aug 25, 2005, 11:37 PM // 23:37

bah, I'm on Win2k, gotta hunt down old drivers

buddhafest · Aug 26, 2005, 11:32 AM // 11:32

this is an amazing find... I will surely try this out and post back my results. OMG i do remember updating my Yukon Gigabit drivers too off windows a while back....

jus a question wutdafeezi.. what motherboard do you have?

and for zixaq.. im on w2k also.. if you find can you post a link? I shall do same if i find one.....

Omiko1 · Aug 26, 2005, 11:39 AM // 11:39

This was the problem, since I rolled back my drivers I have had no problems!!!

This should be a sticky... this works!!

Lukozer · Aug 26, 2005, 11:54 AM // 11:54

This is all well and good if you have that particular ethernet controller, but a lot of us, including me, don't. Also, people like me who are running XP x64 don't have the luxury of simply rolling back to previous drivers, there aren't a huge amount of 64bit ethernet drivers out at the moment.

buddhafest · Aug 26, 2005, 09:14 PM // 21:14

the link to get drivers is from Marvell's own site

http://www.marvell.com/drivers/search.do

You just select the corresponding criteria from the drop down menus to get the appropriate driver.

Hope this will help.

I am going to install the drivers and see if this solves my problem as well. Will post back with results.

buddhafest · Aug 27, 2005, 06:44 AM // 06:44

Well at the Marvell site they didn't provide me with an older version of the driver for Win2K but they did provide the latest one released this month.

8.27.4.3 and so far it seems to be working.. I left the game on for 5 hours and it didn't lockup. Settings were at 1280x1024 with 2xAA at the second highest quality.

I believe that the problem for some players lockups would be their ethernet drivers.

Those of you running drivers that are 8.35 should definately try to update to newer ones or rollback to older ones.

I will try to run the game even longer on 1600x1200 4xAA and see how long it holds up.

Thanks to Wutda for posting this in the first place.

This should b a sticky as well like another Unofficial fix for locksups and freezes

wutdafeezi · Aug 27, 2005, 07:44 AM // 07:44

Quote:

Originally Posted by buddhafest

this is an amazing find... I will surely try this out and post back my results. OMG i do remember updating my Yukon Gigabit drivers too off windows a while back....

jus a question wutdafeezi.. what motherboard do you have?

and for zixaq.. im on w2k also.. if you find can you post a link? I shall do same if i find one.....

i use a asus av8 deluxe

buddhafest · Aug 27, 2005, 02:38 PM // 14:38

Okay, so I am just reporting that at my second run of leaving the game on has been successful. Game has not locked up after 6 hours at 1600x1200 with 4xAA and highest quality settings.

I used to get lockups within the hour, 30 minuts or the max i could play as 3 hours. I was never able to get this game to run this long two times in a row.

wutdafeezi · Aug 29, 2005, 07:13 AM // 07:13

glad to see you're still running smooth buddhafest! mods if possible this should be a sticky! its a good info for people that downloaded those drivers on windows update

CalefanDraven · Sep 01, 2005, 11:41 AM // 11:41

wutdafeezi, I just saw this post and If this works I may hunt you down a kiss you.

I have nearly rebuilt my pc through suggestions from GW Tech SUpport, Friends, and the web to try and fix my lockups.

Have a p4 2.8 HT was told it could be heat (spent 50 dollars on a beetle cooler) and a couple more exhaust fans.

Was told it could be RAM went from 1GIG to 3 Gigs.

Was told it could be power went from 300 watt to 580.

Was told it was the onboard sound. Bought and audigy 2

Finally was told it was my 9800Pro overheating bought an ATI silencer cooler.

SO....if simply rolling back this driver fixes my lockups be looking for me

chris_lyon82 · Sep 02, 2005, 05:39 PM // 17:39

[QUOTE=wutdafeezi]I think I found the source of the problem.

I had updated the Marvell Yukon integrated ethernet controller on Windows Update on 7/20/2005 to version 8.35.........[QUOTE]

Hi when your game use to crash how did it crash? My game just freezes and then I have to ctrl-alt-del to get back to the desktop, so i was wondering if this is the same problem.

I have changed my drivers. On the main screen it shows the driver as version 7.21.1.3 date 19/08/2004, however if I go to driver details it shows version 8.32.2.3 built by: WinDDK

Is this right?

Thanks

wutdafeezi · Sep 03, 2005, 02:41 AM // 02:41

Quote:

Originally Posted by chris_lyon82

Hi when your game use to crash how did it crash? My game just freezes and then I have to ctrl-alt-del to get back to the desktop, so i was wondering if this is the same problem.

I have changed my drivers. On the main screen it shows the driver as version 7.21.1.3 date 19/08/2004, however if I go to driver details it shows version 8.32.2.3 built by: WinDDK

Is this right?

Thanks

First off, when my game crashed I couldn't even do a ctrl+alt+del. I had to manually shut it off by holding the power on button. Second off, after rolling back the drivers did you have any problems running GW? As long it doesn't display the 8.35.2.3 version of the drivers you should be set. Also curious what kind of motherboard are you using?